Printed from Kezuriba (kezuriba.net/en/nc/g01/)

G01

Machining center, LatheModal, group 01

Linear interpolation (cutting feed)

⌨Format and notes

G01 X_ Y_ Z_ F_ (lathe: G01 X(U)_ Z(W)_ F_)

Once commanded, F stays in effect until changed (modal)
Basic usage: feed per minute (mm/min) on machining centers, feed per revolution (mm/rev) on lathes
On Haas lathes, G01 also has formats that add a chamfer or corner radius (I/K/R/A, etc.)

Diagram: Rapid (G00) and cutting feed (G01) paths

G01 cuts in a straight line from start to end at the feed set by F (combined speed of all axes). The dotted line in the figure is the G00 rapid move.

The meaning shown agrees in at least two sources (agreement confirmed). Explanations are written in our own words.

Mitsubishi Electric — The Basics of CNC Machining Programming (for Machining center) e-Learning material (PDF) mitsubishielectric.com
Mitsubishi Electric — The Basics of CNC Machining Programming (for Lathe) e-Learning material (PDF, BNP-C8027-688) mitsubishielectric.com
Siemens AG — SINUMERIK 802D sl/840D/840D sl/840Di/840Di sl/810D Programming Manual ISO Milling, 04.2007 Edition (6FC5398-7BP10-0BA0) cache.industry.siemens.com
Haas Automation, Inc. — Mill Operator's Manual – 17 Mill G-Codes (online version) haascnc.com
Haas Automation, Inc. — Lathe Operator's Manual – 16 Lathe G-Codes (online version) haascnc.com
National Institute of Standards and Technology (NIST), USA — The NIST RS274NGC Interpreter – Version 3 (NISTIR 6556, 2000) nvlpubs.nist.gov
Ministry of Health, Labour and Welfare (MHLW), Human Resources Development Bureau, Office of the Councillor for Skills Evaluation — Human resource development manual using the practical exam tasks of the Grade 3 Skilled Worker Test: CNC lathe work (March 2018) waza.mhlw.go.jp