Printed from Kezuriba (kezuriba.net/en/nc/g85/)

G85

Machining center, LatheModal, group 09

Boring cycle (feed in, feed out)

⌨On machining centers

G85 X_ Y_ Z_ R_ F_ K_

For reaming and boring. Since the return is also at cutting feed, the bore wall is wiped on both strokes

Diagram: G85 motion (side view)

Cutting feed both in and out. A reamer or boring bar strokes the bore surface in and out. Figure shows G98 (rapid from R point to initial point).

The same number means something different on lathes (FANUC-type G-code system A). Group 10.

The meaning shown agrees in at least two sources (agreement confirmed). Explanations are written in our own words.

Siemens AG — SINUMERIK 802D sl/840D/840D sl/840Di/840Di sl/810D Programming Manual ISO Milling, 04.2007 Edition (6FC5398-7BP10-0BA0) cache.industry.siemens.com
Haas Automation, Inc. — Mill Operator's Manual – 17 Mill G-Codes (online version) haascnc.com
National Institute of Standards and Technology (NIST), USA — The NIST RS274NGC Interpreter – Version 3 (NISTIR 6556, 2000) nvlpubs.nist.gov
Siemens AG — SINUMERIK 802D sl/840D/840D sl/840Di/840Di sl/810D Programming Manual ISO Turning, 04.2007 Edition cache.industry.siemens.com
Haas Automation, Inc. — Lathe Operator's Manual – 16 Lathe G-Codes (online version) haascnc.com