日本語

Printed from Kezuriba (kezuriba.net/en/threads/m22/)

M22×2.5

ISO metric coarse thread

Nominal diameter 22 mm, pitch 2.5 mm. Tap makers recommend slightly different drill sizes, so they are listed side by side.

Tap drill, rule of thumb (d − P)
19.50 mmMaker recommendations below
Minor diameter D1 range (6H)
19.294 – 19.744 mmKeep the hole inside this range[4][5][3]
Pitch diameter d2 (basic)
20.376 mmd2 = d − 0.649519P
M22 basic profile and dimensions (schematic)
external thread (bolt)major dia. d = 22pitch dia. d2 = 20.376minor dia. D1 = 19.2946H range 19.294–19.744 (tap drill target)P = 2.5H160°

Thread angle 60°. H1 (basic thread engagement) = 0.541266P = 1.353. The pitch diameter is where the thread ridge and groove are equally wide. For cutting taps, pick a drill that lands inside the 6H tolerance of the minor diameter D1. Enlarged to show the shape; proportions are not to scale.

⌀Tap drill size for cutting taps (maker recommendations)

For internal thread class 6H. Values as given in each maker’s technical data (mm).

MakerRecommended drillNotesSource
OSG19.5min. 19.3, 6H max. 19.74
[3]
Nachi (Nachi-Fujikoshi)19.5high-performance drill 19.6[5]
Yamawa19.6[4]
Calculate tapping RPM for this size →

Forming (roll) tap drill sizes differ by maker and product line; see the Japanese page for the table.

⌇Basic dimensions

Nominal (major) diameter d22
Pitch P2.5
Pitch diameter d2, D220.376
Basic minor diameter D1 (nut), d1 (bolt)19.294
Fundamental triangle height H = 0.866025P2.165
Basic engagement H1 = 0.541266P1.353

Basic dimensions are theoretical values without tolerance. Try other pitches with the thread dimension calculator.

⬡Bolt and nut sizes

ItemmmConfidence
Hex bolt width across flats s (ISO-based JIS, main body)341 source (reference)[8]
Hex bolt width across flats s (old JIS, annex)32Agrees in 2+ sources[9][8]
Hex nut width across flats s (ISO-based JIS, main body)34Agrees in 2+ sources[8][10]
Hex nut width across flats s (old JIS, annex)32Agrees in 2+ sources[11][8]
Hex nut height m (style 1, max.)19.41 source (reference)[10]
Socket head cap screw head diameter dk (max.)33Agrees in 2+ sources[12][13]
Socket head cap screw head height k (max.)22Agrees in 2+ sources[12][13]
Hex socket size s (hex key size)17Agrees in 2+ sources[12][13][8]
Hex socket depth t (min.)11Agrees in 2+ sources[12][13]

Note: for M22 the ISO-based and old JIS across-flats sizes differ (34 vs 32). Check before choosing a wrench for Japanese hardware.

⊙Clearance holes and counterbores

ItemmmConfidence
Clearance hole d′ for socket head cap screws241 source (reference)[12]
Counterbore diameter D′ for socket head cap screws351 source (reference)[12]
Counterbore depth H″ (head sits below the surface)23.51 source (reference)[12]
Counterbore depth H′ (head slightly proud)20.51 source (reference)[12]
Clearance hole, class 1 (JIS B 1001)231 source (reference)[14]
Clearance hole, class 2 (JIS B 1001)241 source (reference)[14]
Clearance hole, class 3 (JIS B 1001)261 source (reference)[14]
Spotface diameter for hex bolts and nuts (JIS B 1001)461 source (reference)[14]

Socket-head values are from the reference table of JIS B 1176; clearance-hole classes are from JIS B 1001. The two standards give different clearance holes for some sizes.

≋M22 fine threads

SizeD1 range (6H)Recommended drill (cutting tap)
M22×219.835 – 20.21OSG 20 / Nachi (Nachi-Fujikoshi) 20 / Yamawa 20.1
M22×1.520.376 – 20.676OSG 20.5 / Nachi (Nachi-Fujikoshi) 20.5 / Yamawa 20.6

📚Sources

Most sources are Japanese technical documents from the tap and fastener makers.

  1. iwata-fa.jp https://www.iwata-fa.jp/contents/assets/pdf/technicaldata/2022_tec_other_13.pdf
  2. nbk1560.com https://www.nbk1560.com/images/ja-JP/product/technical_data/meternezi_NBK/meternezi_NBK_1.…
  3. osg.co.jp https://www.osg.co.jp/media_dl/technical/file/drill_hole_size.pdf
  4. yamawa.com https://www.yamawa.com/Portals/0/images/download/holesize/jp/technical-contents-15.pdf
  5. nachi-fujikoshi.co.jp https://www.nachi-fujikoshi.co.jp/dcms_media/other/2501-12.pdf
  6. baer.tools https://baer.tools/en/blog/core-hole-dimensions-for-screw-taps-everything-you-need-to-know
  7. orist.jp https://www.orist.jp/technicalsheet/98015.PDF
  8. eg.aktio.co.jp https://www.eg.aktio.co.jp/wp-content/uploads/R3T_1-5_TONE_bolt_nimen.pdf
  9. tsurugacorp.co.jp https://www.tsurugacorp.co.jp/img/usr/pdf/B00000.pdf
  10. fabory.com https://www.fabory.com/en-GB/p/01103220001
  11. static.nbk1560.com https://static.nbk1560.com/images/ja-JP/product/technical_data/rokkaku_nut_NBK/rokkaku_nut…
  12. jp.misumi-ec.com https://jp.misumi-ec.com/pdf/fa/2015/p1_2363.pdf
  13. farnell.com https://www.farnell.com/datasheets/11699.pdf
  14. static.nbk1560.com https://static.nbk1560.com/images/ja-JP/product/technical_data/boltana_zagurikei_NBK/bolta…