日本語English

标准对应表（JIS、ISO、DIN、ASME 等）

将各国规定同一事项的标准按主题横向并列。共 14 个主题、249 项。标准编号、版本和状态已在日本产业标准调查会、日本规格协会、ISO、DIN Media、ASME 等公开页面上核实，JIS 与 ISO 的对应程度（等同 IDT、修改 MOD）依据日本规格协会的“对应国际标准”栏。不收录标准正文。

JIS 与 ISO 的
对应关系
就在这里确认。

吉祥物 Chips
NEW

ASTM 标准速查表

将 A276、A564、E18 等海外图纸和材质证明书上出现的 ASTM 标准，与其内容及领域相近的 JIS 一并列成一览。

!JIS 仍对应旧 ISO 版本（或已作废 ISO）的标准（20 项）

海外图纸或客户按新版 ISO 指示时，其内容可能与 JIS 不同。

JIS对应的 ISO（该版本的状态）现行 ISO
JIS B 0205-1:2001通用公制螺纹－第1部分：基准牙型ISO 68-1:1998等同（IDT）、作废ISO 68-1:2023公制螺纹（基准牙型、粗牙/细牙、公差）
JIS B 0205-3:2001通用公制螺纹－第3部分：螺纹零件用选定尺寸ISO 262:1998等同（IDT）、作废ISO 262:2023公制螺纹（基准牙型、粗牙/细牙、公差）
JIS B 0205-4:2001通用公制螺纹－第4部分：基本尺寸ISO 724:1993等同（IDT）、作废ISO 724:2023公制螺纹（基准牙型、粗牙/细牙、公差）
JIS B 0209-1:2001通用公制螺纹－公差－第1部分：原则及基础数据ISO 965-1:1998等同（IDT）、ISO 965-1:2026公制螺纹（基准牙型、粗牙/细牙、公差）
JIS B 0209-2:2001通用公制螺纹－公差－第2部分：通用外螺纹和内螺纹的极限尺寸－中等（配合等级）ISO 965-2:1998等同（IDT）、ISO 965-2:2024公制螺纹（基准牙型、粗牙/细牙、公差）
JIS B 0209-3:2001通用公制螺纹－公差－第3部分：结构用螺纹的尺寸公差ISO 965-3:1998等同（IDT）、ISO 965-3:2021公制螺纹（基准牙型、粗牙/细牙、公差）
JIS B 0202:1999圆柱管螺纹ISO 228-1:1994修改（MOD）、ISO 228-1:2000管螺纹（圆柱 G、圆锥 R/Rc/Rp、NPT）
JIS B 0419:1991一般公差－第2部分：未注出公差的形体的几何公差ISO 2768-2:1989等同（IDT）、作废—一般公差（未注公差的尺寸、几何公差）
JIS B 0021:1998产品几何技术规范（GPS）－几何公差表示方式－形状、方向、位置和跳动的公差表示方式ISO/DIS 1101:1996等同（IDT）、ISO 1101:2017几何公差（形状、方向、位置、跳动）与基准
JIS B 0022:1984几何公差用基准ISO 5459:1981修改（MOD）、作废ISO 5459:2024几何公差（形状、方向、位置、跳动）与基准
JIS Z 8317-1:2008制图－尺寸和公差的标注方法－第1部分：一般原则ISO 129-1:2004修改（MOD）、ISO 129-1:2018制图（机械制图、图形表示法、尺寸标注、投影法）
JIS B 0601:2013产品几何技术规范（GPS）－表面结构：轮廓法－术语、定义及表面结构参数ISO 4287:1997等同（IDT）、作废—表面结构（轮廓法参数、图示方法、评定程序）
JIS B 0031:2003产品几何技术规范（GPS）－表面结构的图示方法ISO 1302:2002修改（MOD）、作废—表面结构（轮廓法参数、图示方法、评定程序）
JIS B 0633:2001产品几何技术规范（GPS）－表面结构：轮廓法－表面结构评定的方式及程序ISO 4288:1996等同（IDT）、—表面结构（轮廓法参数、图示方法、评定程序）
JIS B 0651:2001产品几何技术规范（GPS）－表面结构：轮廓法－触针式表面粗糙度测量仪的特性ISO 3274:1996修改（MOD）、作废—表面结构（轮廓法参数、图示方法、评定程序）
JIS B 0681-2:2018产品几何技术规范（GPS）－表面结构：三维－第2部分：术语、定义及表面结构参数ISO 25178-2:2012修改（MOD）、ISO 25178-2:2021表面结构（轮廓法参数、图示方法、评定程序）
JIS Z 2245:2021洛氏硬度试验－试验方法ISO 6508-1:2016修改（MOD）、ISO 6508-1:2023硬度试验（布氏、维氏、洛氏、肖氏、努氏）与换算
JIS B 4053:2013切削用超硬质刀具材料的使用分类及标记符号的标注方法ISO 513:2004修改（MOD）、ISO 513:2012切削刀具（被加工材料、刀具材料的分类，刀片与刀杆的标记符号）
JIS B 6339-3:2011自动换刀用 7/24 锥柄－第3部分：AC、AD、AF、UC、UD、UF、JD 及 JF 型刀柄用拉钉的形状和尺寸ISO 7388-3:2007等同（IDT）、ISO 7388-3:2016刀柄系统（7/24 锥度、HSK、莫氏锥度、ER 弹簧夹头）
JIS B 6064-1:2013双面约束型空心锥柄及主轴端－第1部分：空心锥柄－尺寸ISO 12164-1:2001等同（IDT）、ISO 12164-1:2023刀柄系统（7/24 锥度、HSK、莫氏锥度、ER 弹簧夹头）

打印自 Kezuriba（kezuriba.net/zh/standards/）

螺纹

公制螺纹（基准牙型、粗牙/细牙、公差）

Kezuriba 的相关页面：公制螺纹的尺寸与底孔

JIS名称与 ISO 的对应状态
JIS B 0205-12001通用公制螺纹－第1部分：基准牙型[2][1]ISO 68-1:1998等同（IDT）ISO 已修订为 ISO 68-1:2023现行有效确认 2026-06-22
JIS B 0205-22001通用公制螺纹－第2部分：总体系[2][3]ISO 261:1998等同（IDT）现行有效确认 2026-06-22
JIS B 0205-32001通用公制螺纹－第3部分：螺纹零件用选定尺寸[2][4]ISO 262:1998等同（IDT）ISO 已修订为 ISO 262:2023现行有效确认 2026-06-22
JIS B 0205-42001通用公制螺纹－第4部分：基本尺寸[2][5]ISO 724:1993等同（IDT）ISO 已修订为 ISO 724:2023现行有效确认 2026-06-22
JIS B 0209-12001通用公制螺纹－公差－第1部分：原则及基础数据[7][6]ISO 965-1:1998等同（IDT）ISO 已修订为 ISO 965-1:2026现行有效确认 2026-06-22
JIS B 0209-22001通用公制螺纹－公差－第2部分：通用外螺纹和内螺纹的极限尺寸－中等（配合等级）[7][8]ISO 965-2:1998等同（IDT）ISO 已修订为 ISO 965-2:2024现行有效确认 2026-06-22
JIS B 0209-32001通用公制螺纹－公差－第3部分：结构用螺纹的尺寸公差[7][9]ISO 965-3:1998等同（IDT）ISO 已修订为 ISO 965-3:2021现行有效确认 2026-06-22
JIS B 01231999螺纹的表示方法[11][10]未记载对应程度现行有效确认 2024-10-21

ISO

  • ISO 68-12023ISO general purpose screw threads — Basic and design profiles — Part 1: Metric screw threads[12][13]
  • ISO 68-11998ISO general purpose screw threads — Basic profile — Part 1: Metric screw threads作废[14][15]
  • ISO 2611998ISO general purpose metric screw threads — General plan[16][17]
  • ISO 2622023ISO general purpose metric screw threads — Selected sizes for bolts, screws, studs and nuts[18]
  • ISO 2621998ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts作废[19]
  • ISO 7242023ISO general purpose metric screw threads — Basic dimensions[20][21]
  • ISO 7241993ISO general-purpose metric screw threads — Basic dimensions作废[22]
  • ISO 965-12026ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data[23]
  • ISO 965-12013ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data作废[24][25]
  • ISO 965-22024ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for internal and external threads (tolerance classes 6H and 6g for M1,6 to M100 and 5H and 6h for M1 to M1,4)[26][27]
  • ISO 965-32021ISO general purpose metric screw threads — Tolerances — Part 3: Limit deviations for screw threads[28][29]

DIN

  • DIN 13-11999-11ISO general purpose metric screw threads - Part 1: Nominal sizes for coarse pitch threads; nominal diameter from 1 mm to 68 mm[30]
  • DIN ISO 68-12024-09ISO general purpose screw threads - Basic and design profiles - Part 1: Metric screw threads (ISO 68-1:2023)[31]
  • DIN ISO 2622024-09ISO general purpose metric screw threads - Selected sizes for bolts, screws, studs and nuts (ISO 262:2023)[32]
  • DIN ISO 7242024-09ISO general purpose metric screw threads - Basic dimensions (ISO 724:2023)[33]
  • DIN ISO 965-12026-09ISO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data (ISO 965-1:2026)现行有效（新发布）[34]
  • DIN ISO 965-12017-05ISO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data (ISO 965-1:2013)作废[35]
  • DIN ISO 965-22025-04ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for internal and external threads (tolerance classes 6H and 6g for M1,6 to M100 and 5H and 6h for M1 to M1,4) (ISO 965-2:2024)[36]
  • DIN ISO 965-32024-08ISO general purpose metric screw threads - Tolerances - Part 3: Limit deviations for screw threads (ISO 965-3:2021)[37]

ASME

  • ASME B1.13MB1.13M - 2005 (S2025)Metric Screw Threads: M Profile[38]

其他（ASTM、SAE、GB/T 等）

  • GB/T 192GB/T 192-2025普通螺纹 牙型现行有效[39][40]
  • GB/T 193GB/T 193-2003普通螺纹 直径与螺距系列现行有效[41][42]
  • GB/T 196GB/T 196-2025普通螺纹 基本尺寸现行有效[43][44]
  • GB/T 197GB/T 197-2018普通螺纹 公差现行有效[45][46]

统一螺纹（英制 UN/UNR）

Kezuriba 的相关页面：统一螺纹

JIS名称与 ISO 的对应状态
JIS B 02061973统一粗牙螺纹[48][47]ISO 263:1973修改（MOD）现行有效确认 2024-10-21
JIS B 02081973统一细牙螺纹[50][49]ISO 263:1973修改（MOD）现行有效确认 2024-10-21
JIS B 02101973统一粗牙螺纹的极限尺寸及公差[52][51]未记载对应程度现行有效确认 2024-10-21
JIS B 02121973统一细牙螺纹的极限尺寸及公差[54][53]未记载对应程度现行有效确认 2024-10-21

ISO

  • ISO 68-22023ISO general purpose screw threads — Basic and design profiles — Part 2: Inch screw threads[55][56]
  • ISO 68-21998ISO general purpose screw threads — Basic profile — Part 2: Inch screw threads作废[57]
  • ISO 2631973ISO inch screw threads — General plan and selection for screws, bolts and nuts — Diameter range 0,06 to 6 in[58]
  • ISO 58641993ISO inch screw threads — Allowances and tolerances[59]

ASME

  • ASME B1.1B1.1 - 2024Unified Inch Screw Threads (UN, UNR, and UNJ Thread Forms)[60]

其他（ASTM、SAE、GB/T 等）

  • GB/T 20670GB/T 20670-2006统一螺纹 直径与牙数系列现行有效[61][62]
  • GB/T 20668GB/T 20668-2006统一螺纹 基本尺寸现行有效[63][64]
  • GB/T 20666GB/T 20666-2006统一螺纹 公差现行有效[65][66]

管螺纹（圆柱 G、圆锥 R/Rc/Rp、NPT）

Kezuriba 的相关页面：管螺纹

JIS名称与 ISO 的对应状态
JIS B 02021999圆柱管螺纹[68][67]ISO 228-1:1994修改（MOD）ISO 已修订为 ISO 228-1:2000现行有效确认 2024-10-21
JIS B 02031999圆锥管螺纹[70][69]ISO 7-1:1994修改（MOD）现行有效确认 2024-10-21

ISO

  • ISO 228-12000Pipe threads where pressure-tight joints are not made on the threads — Part 1: Dimensions, tolerances and designation[71][72]
  • ISO 7-11994Pipe threads where pressure-tight joints are made on the threads — Part 1: Dimensions, tolerances and designation[73][74]
  • ISO 7-22000Pipe threads where pressure-tight joints are made on the threads — Part 2: Verification by means of limit gauges[75]

DIN

  • DIN EN ISO 228-12003-05Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000); German version EN ISO 228-1:2003[76]
  • DIN ISO 228-12001-04Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)作废[77]
  • DIN EN 10226-12004-10Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation; German version EN 10226-1:2004[78]

ASME

  • ASME B1.20.1B1.20.1 - 2013 (R2018)Pipe Threads, General Purpose, Inch[79]

其他（ASTM、SAE、GB/T 等）

  • GB/T 7307GB/T 7307-200155°非密封管螺纹现行有效[80][81]
  • GB/T 7306.1GB/T 7306.1-200055°密封管螺纹 第1部分:圆柱内螺纹与圆锥外螺纹现行有效[82][83]
  • GB/T 7306.2GB/T 7306.2-200055°密封管螺纹 第2部分:圆锥内螺纹与圆锥外螺纹现行有效[84][85]
  • GB/T 12716GB/T 12716-201160°密封管螺纹现行有效[86][87]

配合与公差

尺寸公差与配合（IT 等级、孔/轴的公差）

Kezuriba 的相关页面：配合的计算公差带表

JIS名称与 ISO 的对应状态
JIS B 0401-12016产品几何技术规范（GPS）－长度尺寸公差的 ISO 代号体系－第1部分：公差、偏差和配合的基础[89][88]ISO 286-1:2010等同（IDT）现行有效确认 2025-06-20
JIS B 0401-22016产品几何技术规范（GPS）－长度尺寸公差的 ISO 代号体系－第2部分：孔和轴的极限偏差及基本尺寸公差带表[89][90]ISO 286-2:2010等同（IDT）现行有效确认 2025-06-20

ISO

  • ISO 286-12010Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — Part 1: Basis of tolerances, deviations and fits[91][92]
  • ISO 286-22010Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts[93][94]

DIN

  • DIN EN ISO 286-12019-09Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010 + Cor 1:2013); German version EN ISO 286-1:2010 + AC:2013[95]
  • DIN EN ISO 286-22019-09Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010 + Cor 1:2013); German version EN ISO 286-2:2010 + AC:2013[96]

ASME

  • ASME B4.1B4.1 - 1967 (R2020)Preferred Limits and Fits for Cylindrical Parts[97][98]
  • ASME B4.2B4.2 - 1978 (R2020)Preferred Metric Limits and Fits[99][98]
  • ASME Y14.39DRAFTPreferred Limits and Fits制定中（草案）[98]

其他（ASTM、SAE、GB/T 等）

  • GB/T 1800.1GB/T 1800.1-2020产品几何技术规范（GPS） 线性尺寸公差ISO代号体系 第1部分：公差、偏差和配合的基础现行有效[100][101]
  • GB/T 1800.2GB/T 1800.2-2020产品几何技术规范（GPS） 线性尺寸公差ISO代号体系 第2部分：标准公差带代号和孔、轴的极限偏差表现行有效[102][103]

一般公差（未注公差的尺寸、几何公差）

JIS名称与 ISO 的对应状态
JIS B 04051991一般公差－第1部分：未注出公差的线性尺寸和角度尺寸的公差[105][104]ISO 2768-1:1989等同（IDT）现行有效确认 2025-06-20
JIS B 04191991一般公差－第2部分：未注出公差的形体的几何公差[107][106]ISO 2768-2:1989等同（IDT）现行有效确认 2025-06-20

ISO

  • ISO 2768-11989General tolerances — Part 1: Tolerances for linear and angular dimensions without individual tolerance indications[108][109]
  • ISO 2768Geometrical product specifications (GPS) — Dimensional tolerancing — Tolerance limits for general specification of linear and angular sizes制定中（尚未发布）[110]
  • ISO 2768-21989General tolerances — Part 2: Geometrical tolerances for features without individual tolerance indications作废→ ISO 22081:2021[111]
  • ISO 220812021Geometrical product specifications (GPS) — Geometrical tolerancing — General geometrical specifications and general size specifications[112][113]

DIN

  • DIN ISO 2768-11991-06General tolerances; tolerances for linear and angular dimensions without individual tolerance indications; identical with ISO 2768-1:1989[114]
  • DIN EN ISO 27682025-09- Draft Geometrical product specifications (GPS) - Dimensional tolerancing - Tolerance limits for general specification of linear and angular sizes (ISO/DIS 2768:2025); German and English version prEN ISO 2768:2025草案[115]
  • DIN EN ISO 220812022-10Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications (ISO 22081:2021); German version EN ISO 22081:2021[116]

ASME

  • ASME B4.3B4.3-1978 (R2004)General Tolerances for Metric Dimensioned Products作废[98]

其他（ASTM、SAE、GB/T 等）

  • GB/T 1804GB/T 1804-2000一般公差 未注公差的线性和角度尺寸的公差现行有效[117][118]
  • GB/T 1184GB/T 1184-1996形状和位置公差 未注公差值现行有效[119][120]

几何公差与图纸

几何公差（形状、方向、位置、跳动）与基准

JIS名称与 ISO 的对应状态
JIS B 00211998产品几何技术规范（GPS）－几何公差表示方式－形状、方向、位置和跳动的公差表示方式[122][121]ISO/DIS 1101:1996等同（IDT）ISO 已修订为 ISO 1101:2017现行有效确认 2023-10-20
JIS B 00221984几何公差用基准[124][123]ISO 5459:1981修改（MOD）ISO 已修订为 ISO 5459:2024现行有效确认 2024-06-20
JIS B 00242019产品几何技术规范（GPS）－基本原则－GPS 标注涉及的概念、原则和规则[126][125]ISO 8015:2011修改（MOD）现行有效确认 2023-06-20

ISO

  • ISO 11012017Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out[127][128]
  • ISO 54592024Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems[129][130]
  • ISO 54591981Technical drawings — Geometrical tolerancing — Datums and datum-systems for geometrical tolerances作废[131]
  • ISO 80152011Geometrical product specifications (GPS) — Fundamentals — Concepts, principles and rules[132][133]
  • ISO 80151985Technical drawings — Fundamental tolerancing principle作废[134]

DIN

  • DIN EN ISO 11012017-09Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017); German version EN ISO 1101:2017[135]
  • DIN EN ISO 54592025-12Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2024); German version EN ISO 5459:2024[136]
  • DIN EN ISO 80152011-09Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011); German version EN ISO 8015:2011[137]

ASME

  • ASME Y14.5Y14.5 - 2018 (R2024)Dimensioning and Tolerancing[138][98]

其他（ASTM、SAE、GB/T 等）

  • GB/T 1182GB/T 1182-2018产品几何技术规范（GPS） 几何公差 形状、方向、位置和跳动公差标注现行有效[139][140]

制图（机械制图、图形表示法、尺寸标注、投影法）

JIS名称与 ISO 的对应状态
JIS B 00012019机械制图[142][141]未记载对应程度现行有效确认 2024-06-20
JIS Z 83102010制图通则[144][143]未记载对应程度现行有效确认 2024-10-21
JIS Z 8315-21999制图－投影法－第2部分：正投影法[146][145]ISO 5456-2:1996等同（IDT）现行有效确认 2024-06-20
JIS Z 83161999制图－图形表示的原则[148][147]ISO 128:1982修改（MOD）现行有效确认 2024-06-20
JIS Z 8317-12008制图－尺寸和公差的标注方法－第1部分：一般原则[150][149]ISO 129-1:2004修改（MOD）ISO 已修订为 ISO 129-1:2018现行有效确认 2022-06-20

ISO

  • ISO 128-12020Technical product documentation (TPD) — General principles of representation — Part 1: Introduction and fundamental requirements[151][152]
  • ISO 128-22022Technical product documentation (TPD) — General principles of representation — Part 2: Basic conventions for lines[153]
  • ISO 128-32022Technical product documentation (TPD) — General principles of representation — Part 3: Views, sections and cuts[154]
  • ISO 129-12018Technical product documentation (TPD) — Presentation of dimensions and tolerances — Part 1: General principles[155][156]
  • ISO 5456-21996Technical drawings — Projection methods — Part 2: Orthographic representations[157][158]

DIN

  • DIN EN ISO 128-12022-02Technical product documentation (TPD) - General principles of representation - Part 1: Introduction and fundamental requirements (ISO 128-1:2020); German version EN ISO 128-1:2020[159]
  • DIN EN ISO 129-12022-02Technical product documentation (TPD) - Presentation of dimensions and tolerances - Part 1: General principles (ISO 129-1:2018 + Amd 1:2020); German version EN ISO 129-1:2019 + A1:2021[160]
  • DIN ISO 5456-21998-04Technical drawings - Projection methods - Part 2: Orthographic representations (ISO 5456-2:1996)[161]

ASME

  • ASME Y14.3Y14.3 - 2012 (R2024)Orthographic and Pictorial Views[162][98]
  • ASME Y14.100Y14.100 - 2017Engineering Drawing Practices[163][98]

其他（ASTM、SAE、GB/T 等）

  • GB/T 4458.1GB/T 4458.1-2002机械制图 图样画法 视图现行有效[164][165]
  • GB/T 14692GB/T 14692-2008技术制图 投影法现行有效[166][167]

表面结构

表面结构（轮廓法参数、图示方法、评定程序）

Kezuriba 的相关页面：表面粗糙度的换算

JIS名称与 ISO 的对应状态
JIS B 06012013产品几何技术规范（GPS）－表面结构：轮廓法－术语、定义及表面结构参数[169][168]ISO 4287:1997等同（IDT）现行有效确认 2022-10-20
JIS B 00312003产品几何技术规范（GPS）－表面结构的图示方法[171][172][170]ISO 1302:2002修改（MOD）现行有效确认 2018-10-22
JIS B 06332001产品几何技术规范（GPS）－表面结构：轮廓法－表面结构评定的方式及程序[174][173]ISO 4288:1996等同（IDT）现行有效确认 2025-06-20
JIS B 06512001产品几何技术规范（GPS）－表面结构：轮廓法－触针式表面粗糙度测量仪的特性[176][177][175]ISO 3274:1996修改（MOD）现行有效确认 2021-10-20
JIS B 0681-22018产品几何技术规范（GPS）－表面结构：三维－第2部分：术语、定义及表面结构参数[179][178]ISO 25178-2:2012修改（MOD）ISO 已修订为 ISO 25178-2:2021

ISO

  • ISO 21920-12021Geometrical product specifications (GPS) — Surface texture: Profile — Part 1: Indication of surface texture[180][181]
  • ISO 21920-22021Geometrical product specifications (GPS) — Surface texture: Profile — Part 2: Terms, definitions and surface texture parameters[182][183]
  • ISO 21920-32021Geometrical product specifications (GPS) — Surface texture: Profile — Part 3: Specification operators[184][185]
  • ISO 25178-22021Geometrical product specifications (GPS) — Surface texture: Areal — Part 2: Terms, definitions and surface texture parameters[186][187]
  • ISO 32741996Geometrical Product Specifications (GPS) — Surface texture: Profile method — Nominal characteristics of contact (stylus) instruments作废[188]
  • ISO 42871997Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters作废→ ISO 21920-2:2021[189]
  • ISO 13022002Geometrical Product Specifications (GPS) — Indication of surface texture in technical product documentation作废→ ISO 21920-1:2021[190][191]
  • ISO 42881996Geometrical Product Specifications (GPS) — Surface texture: Profile method — Rules and procedures for the assessment of surface texture作废→ ISO 21920-3:2021[184]

DIN

  • DIN EN ISO 21920-12022-12Geometrical product specifications (GPS) - Surface texture: Profile - Part 1: Indication of surface texture (ISO 21920-1:2021); German version EN ISO 21920-1:2022[192]
  • DIN EN ISO 21920-22022-12Geometrical product specifications (GPS) - Surface texture: Profile - Part 2: Terms, definitions and surface texture parameters (ISO 21920-2:2021, Corrected version 2022-06); German version EN ISO 21920-2:2022[193]
  • DIN EN ISO 21920-32022-12Geometrical product specifications (GPS) - Surface texture: Profile - Part 3: Specification operators (ISO 21920-3:2021); German version EN ISO 21920-3:2022[194]

ASME

  • ASME B46.1B46.1 - 2019 (R2026)Surface Texture (Surface Roughness, Waviness, and Lay)[195]
  • ASME Y14.36Y14.36 - 2018 (R2024)Surface Texture Symbols[196][98]

其他（ASTM、SAE、GB/T 等）

  • GB/T 3505GB/T 3505-2009产品几何技术规范（GPS） 表面结构 轮廓法 术语、定义及表面结构参数现行有效[197][198]
  • GB/T 131GB/T 131-2006产品几何技术规范（GPS） 技术产品文件中表面结构的表示法现行有效[199][200]

硬度

硬度试验（布氏、维氏、洛氏、肖氏、努氏）与换算

Kezuriba 的相关页面：硬度换算

JIS名称与 ISO 的对应状态
JIS Z 2243-12018布氏硬度试验－第1部分：试验方法[202][201]ISO 6506-1:2014等同（IDT）现行有效确认 2022-06-20
JIS Z 2244-12024维氏硬度试验－第1部分：试验方法[204][203]ISO 6507-1:2023修改（MOD）现行有效
JIS Z 22452021洛氏硬度试验－试验方法[206][205]ISO 6508-1:2016修改（MOD）ISO 已修订为 ISO 6508-1:2023现行有效
JIS Z 22462022肖氏硬度试验－试验方法[208][207]未记载对应程度现行有效确认 2026-06-22
JIS Z 2251-12024努氏硬度试验－第1部分：试验方法[210][209]ISO 4545-1:2023修改（MOD）现行有效

ISO

  • ISO 6506-12014Metallic materials — Brinell hardness test — Part 1: Test method[211][212]
  • ISO 6507-12023Metallic materials — Vickers hardness test — Part 1: Test method[213][214]
  • ISO 6508-12023Metallic materials — Rockwell hardness test — Part 1: Test method[215][216]
  • ISO 4545-12023Metallic materials — Knoop hardness test — Part 1: Test method[217]
  • ISO 182652013Metallic materials — Conversion of hardness values[218][219]

DIN

  • DIN EN ISO 6506-12015-02Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014); German version EN ISO 6506-1:2014[220]
  • DIN EN ISO 6507-12024-01Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:2023); German version EN ISO 6507-1:2023[221]
  • DIN EN ISO 6508-12024-04Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2023); German version EN ISO 6508-1:2023[222]
  • DIN EN ISO 4545-12024-01Metallic materials - Knoop hardness test - Part 1: Test method (ISO 4545-1:2023); German version EN ISO 4545-1:2023[223]
  • DIN EN ISO 182652014-02Metallic materials - Conversion of hardness values (ISO 18265:2013); German version EN ISO 18265:2013[224]

其他（ASTM、SAE、GB/T 等）

  • ASTM E10E10-23Standard Test Method for Brinell Hardness of Metallic Materials[225]
  • ASTM E18E18-25Standard Test Methods for Rockwell Hardness of Metallic Materials[226]
  • ASTM E92E92-26Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials[227]
  • ASTM E384E384-22Standard Test Method for Microindentation Hardness of Materials[228]
  • ASTM E140E140-12B(2019)e1Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness[229]
  • SAE J417J417_201801Hardness Tests and Hardness Number Conversions现行有效（稳定化＝无修订计划）[230]
  • GB/T 231.1GB/T 231.1-2018金属材料 布氏硬度试验 第1部分：试验方法现行有效[231][232]
  • GB/T 4340.1GB/T 4340.1-2024金属材料 维氏硬度试验 第1部分：试验方法现行有效[233][234]
  • GB/T 230.1GB/T 230.1-2018金属材料 洛氏硬度试验 第1部分：试验方法现行有效[235][236]
  • GB/T 33362GB/T 33362-2016金属材料 硬度值的换算现行有效[237][238]

材料符号

钢铁材料牌号体系（碳素钢、合金钢、不锈钢、工具钢）

Kezuriba 的相关页面：材料与国外对应材料厂商钢种名称

JIS名称与 ISO 的对应状态
JIS G 40512026机械结构用碳素钢（优质碳素结构钢）[240][239]ISO 683-1:2016修改（MOD）现行有效
JIS G 40532026机械结构用合金钢钢材[242][241]ISO 683-1:2016修改（MOD）现行有效
JIS G 43032021不锈钢棒[244][243]ISO 16143-2:2014修改（MOD）现行有效确认 2025-10-20
JIS G 43042021热轧不锈钢板及钢带[246][245]ISO 16143-1:2014修改（MOD）现行有效确认 2025-10-20
JIS G 43052021冷轧不锈钢板及钢带[248][247]ISO 16143-1:2014修改（MOD）现行有效确认 2025-10-20
JIS G 44012025碳素工具钢钢材[250][249]ISO 4957:2018修改（MOD）现行有效
JIS G 44042025合金工具钢钢材[252][251]ISO 4957:2018修改（MOD）现行有效
JIS G 31012024一般结构用轧制钢材[254][253]ISO 630-1:2021修改（MOD）现行有效

ISO

  • ISO 683-12016Heat-treatable steels, alloy steels and free-cutting steels — Part 1: Non-alloy steels for quenching and tempering·[255][256]
  • ISO 683-22016Heat-treatable steels, alloy steels and free-cutting steels — Part 2: Alloy steels for quenching and tempering[257]
  • ISO 683-32022公开资料中未能确认
  • ISO 49572018Tool steels[258][259]
  • ISO 155102014Stainless steels — Chemical composition[260]
  • ISO 16143-22014公开资料中未能确认
  • ISO 630-12021公开资料中未能确认

DIN

  • DIN EN 10027-12017-01Designation systems for steels - Part 1: Steel names; German version EN 10027-1:2016[261]
  • DIN EN 10027-22015-07Designation systems for steels - Part 2: Numerical system[262]
  • DIN EN ISO 683-12018-09Heat-treatable steels, alloy steels and free-cutting steels - Part 1: Non-alloy steels for quenching and tempering (ISO 683-1:2016); German version EN ISO 683-1:2018[263]
  • DIN EN 10088-32024-04Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resistant steels for general purposes; German version EN 10088-3:2023[264]
  • DIN EN ISO 49572018-11Tool steels (ISO 4957:2018); German version EN ISO 4957:2018[265]

其他（ASTM、SAE、GB/T 等）

  • SAE J403J403_202402Chemical Compositions of SAE Carbon Steels现行有效（稳定化＝无修订计划）[266]
  • SAE J404J404_200901Chemical Compositions of SAE Alloy Steels现行有效（修订版）[267]
  • ASTM A276/A276MA276/A276M-25Standard Specification for Stainless Steel Bars and Shapes[268]
  • GB/T 699GB/T 699-2015优质碳素结构钢现行有效[269][270]
  • GB/T 3077GB/T 3077-2015合金结构钢现行有效[271][272]
  • GB/T 1220GB/T 1220-2007不锈钢棒现行有效[273][274]
  • GB/T 20878GB/T 20878-2024不锈钢 牌号及化学成分现行有效[275][276]
  • GB/T 1299GB/T 1299-2025工模具钢现行有效[277][278]
  • GB/T 221GB/T 221-2008钢铁产品牌号表示方法现行有效[279][280]
  • GB/T 17616GB/T 17616-2025钢铁及合金牌号统一数字代号体系现行有效[281][282]

刀具与刀柄

切削刀具（被加工材料、刀具材料的分类，刀片与刀杆的标记符号）

Kezuriba 的相关页面：车刀刀杆的代号

JIS名称与 ISO 的对应状态
JIS B 40532013切削用超硬质刀具材料的使用分类及标记符号的标注方法[284][283]ISO 513:2004修改（MOD）ISO 已修订为 ISO 513:2012现行有效确认 2023-10-20
JIS B 41202025可转位刀片的型号表示规则[286][285]ISO 1832:2017修改（MOD）
JIS B 41252016可转位刀片用刀夹——方柄及刀盒的型号表示规则[288][287]ISO 5608:2012修改（MOD）现行有效确认 2026-06-22
JIS B 41212013可转位刀片[290][289]ISO 3364:2011修改（MOD）现行有效确认 2023-10-20

ISO

  • ISO 5132012Classification and application of hard cutting materials for metal removal with defined cutting edges — Designation of the main groups and groups of application[291][292]
  • ISO 18322017Indexable inserts for cutting tools — Designation[293][294]
  • ISO 56082012Turning and copying tool holders and cartridges for indexable inserts — Designation[295][296]

DIN

  • DIN ISO 5132014-05Classification and application of hard cutting materials for metal removal with defined cutting edges - Designation of the main groups and groups of application (ISO 513:2012)[297]
  • DIN ISO 18322017-06Indexable inserts for cutting tools - Designation (ISO 1832:2017)[298]

其他（ASTM、SAE、GB/T 等）

  • ANSI B212.42002（被视为最新的版本）Cutting Tools - Indexable Inserts - Identification System[299]公开资料中未能确认
  • GB/T 2075GB/T 2075-2025切削加工用硬切削材料的分类和用途 大组和用途小组的分类代号现行有效[300][301]
  • GB/T 2076GB/T 2076-2021切削刀具用可转位刀片 型号表示规则现行有效[302][303]
  • GB/T 5343.1GB/T 5343.1-2007可转位车刀及刀夹 第1部分：型号表示规则现行有效[304][305]

刀柄系统（7/24 锥度、HSK、莫氏锥度、ER 弹簧夹头）

Kezuriba 的相关页面：主轴锥度莫氏锥度弹簧夹头

JIS名称与 ISO 的对应状态
JIS B 6339-12011自动换刀用 7/24 锥度刀柄 第 1 部分：A、AD、AF、U、UD 和 UF 型刀柄的形状和尺寸[307][306]ISO 7388-1:2007等同（IDT）现行有效确认 2021-10-20
JIS B 6339-22011自动换刀用 7/24 锥度刀柄 第 2 部分：J、JD 和 JF 型刀柄的形状和尺寸[307][308]ISO 7388-2:2007等同（IDT）现行有效确认 2021-10-20
JIS B 6339-32011自动换刀用 7/24 锥柄－第3部分：AC、AD、AF、UC、UD、UF、JD 及 JF 型刀柄用拉钉的形状和尺寸[307][309]ISO 7388-3:2007等同（IDT）ISO 已修订为 ISO 7388-3:2016现行有效确认 2021-10-20
JIS B 6064-12013双面约束型空心锥柄及主轴端－第1部分：空心锥柄－尺寸[311][310]ISO 12164-1:2001等同（IDT）ISO 已修订为 ISO 12164-1:2023现行有效确认 2023-10-20
JIS B 6064-22013两面定位空心锥柄及主轴端 第 2 部分：主轴端 尺寸[311][312]ISO 12164-2:2001等同（IDT）现行有效确认 2023-10-20
JIS B 40031999工具用锥柄及锥套 形状和尺寸[314][313]ISO 296:1991修改（MOD）现行有效确认 2024-10-21

ISO

  • ISO 7388-12007Tool shanks with 7/24 taper for automatic tool changers — Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF[315][316]
  • ISO 7388-22007Tool shanks with 7/24 taper for automatic tool changers — Part 2: Dimensions and designation of shanks of forms J, JD and JF[317][318]
  • ISO 7388-32016Tool shanks with 7/24 taper for automatic tool changers - Part 3: Retention knobs of forms AD, AF, UD, UF, JD and JF[319]
  • ISO 12164-12023Hollow taper interface with flange contact surface — Part 1: Shanks of types A, AB, C, CB and EB[320][321]
  • ISO 2961991Machine tools — Self-holding tapers for tool shanks[322][323]
  • ISO 154882003Collets with 8 degree setting angle for tool shanks — Collets, nuts and fitting dimensions[324][325]

DIN

  • DIN 69871-11995-10Tool shanks with 7/24 taper for automatic tool exchange - Part 1: Type A, type AD, type B and with data media作废[326]
  • DIN ISO 7388-12014-07Tool shanks with 7/24 taper for automatic tool changers - Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF (ISO 7388-1:2007)[327]
  • DIN ISO 7388-22021-12Tool shanks with 7/24 taper for automatic tool changers - Part 2: Dimensions and designation of shanks of forms J, JD and JF (ISO 7388-2:2007)[328]
  • DIN 69893-12011-04Hollow taper shanks with flange contact surface - Part 1: Hollow taper shanks type A and type C; Dimensions and design作废[329]
  • DIN 228-11987-05Morse tapers and metric tapers; taper shanks[330]
  • DIN 64992002-04Collets with 8° setting angle for tool shanks - Collets, nuts and fitting dimensions作废[331]
  • DIN ISO 154882006-01Collets with 8° setting angle for tool shanks - Collets, nuts and fitting dimensions (ISO 15488:2003)[332]

ASME

  • ASME B5.50B5.50 - 2015 (R2025)7/24 Taper Tool to Spindle Connection for Automatic Tool Change[333]
  • ASME B5.62MB5.62M - 2016 (R2022)Hollow Taper Tooling with Flange-Face Contact[334]
  • ASME B5.10B5.10 - 1994 (S2019)Machine Tapers-Self Holding and Steep Taper Series[335]

其他（ASTM、SAE、GB/T 等）

  • GB/T 10944.1GB/T 10944.1-2013自动换刀7:24圆锥工具柄 第1部分：A、AD、AF、U、UD和UF型柄的尺寸和标记现行有效[336][337]
  • GB/T 1443GB/T 1443-2016机床和工具柄用自夹圆锥现行有效[338][339]

齿轮

齿轮（基准齿条、模数、精度等级）

Kezuriba 的相关页面：齿轮计算与数据

JIS名称与 ISO 的对应状态
JIS B 1701-12012圆柱齿轮——渐开线齿廓——第 1 部分：标准基准齿条齿廓[341][340]ISO 53:1998等同（IDT）现行有效确认 2021-10-20
JIS B 1701-22017圆柱齿轮——渐开线齿廓——第 2 部分：模数[341][342]ISO 54:1996修改（MOD）现行有效确认 2022-10-20
JIS B 1702-12016圆柱齿轮——精度等级——第 1 部分：齿面偏差的定义和允许值[344][343]ISO 1328-1:2013修改（MOD）现行有效确认 2021-10-20
JIS B 1702-22022圆柱齿轮——精度等级——第 2 部分：双面啮合偏差的定义和允许值[344][345]ISO 1328-2:2020等同（IDT）现行有效

ISO

  • ISO 531998Cylindrical gears for general and heavy engineering — Standard basic rack tooth profile[346][347]
  • ISO 541996Cylindrical gears for general engineering and for heavy engineering — Modules[348][349]
  • ISO 1328-12013Cylindrical gears — ISO system of flank tolerance classification — Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth[350][351]
  • ISO 1328-22020Cylindrical gears - ISO system of flank tolerance classification - Part 2: Definitions and allowable values of double flank radial composite deviations[352]

DIN

  • DIN 8671986-02Basic rack tooth profiles for involute teeth of cylindrical gears for general engineering and heavy engineering[353]
  • DIN 780-11977-05Series of Modules for Gears; Modules for Spur Gears[354]
  • DIN 39611978-08Tolerances for Cylindrical Gear Teeth; Bases作废[355]
  • DIN 3962-11978-08Tolerances for Cylindrical Gear Teeth; Tolerances for Deviations of Individual Parameters作废[356]
  • DIN ISO 1328-12018-03Cylindrical gears - ISO system of flank tolerance classification - Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth (ISO 1328-1:2013)[357]
  • DIN ISO 1328-22021-09Cylindrical gears - ISO system of flank tolerance classification - Part 2: Definitions and allowable values of double flank radial composite deviations (ISO 1328-2:2020)[358]

其他（ASTM、SAE、GB/T 等）

  • ANSI/AGMA ISO 1328-1-B14B14Cylindrical gears - ISO system of flank tolerance classification Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth现行有效（2024-09-18 重新确认）[359]
  • GB/T 1356GB/T 1356-2001通用机械和重型机械用圆柱齿轮 标准基本齿条齿廓现行有效[360][361]
  • GB/T 1357GB/T 1357-2008通用机械和重型机械用圆柱齿轮 模数现行有效[362][363]
  • GB/T 10095.1GB/T 10095.1-2022圆柱齿轮 ISO齿面公差分级制 第1部分：齿面偏差的定义和允许值现行有效[364][365]

NC、CAD

NC 程序（G 代码的格式与地址字）与坐标系

Kezuriba 的相关页面：G、M 代码词典

JIS名称与 ISO 的对应状态
JIS B 6315-12013工业自动化系统与集成 机床数值控制 程序格式和地址字定义 第 1 部分：点位、直线运动和轮廓控制系统的数据格式[367][366]ISO 6983-1:2009修改（MOD）现行有效确认 2023-10-20
JIS B 63102003工业自动化系统 机器及设备的控制 坐标系和运动的符号[369][368]ISO 841:2001等同（IDT）现行有效确认 2023-10-20

ISO

  • ISO 6983-12009Automation systems and integration — Numerical control of machines — Program format and definitions of address words — Part 1: Data format for positioning, line motion and contouring control systems[370][371]
  • ISO 6983-11982Numerical control of machines — Program format and definition of address words — Part 1: Data format for positioning, line motion and contouring control systems作废[372][373]
  • ISO 8412001Industrial automation systems and integration — Numerical control of machines — Coordinate system and motion nomenclature[374][375]

DIN

  • DIN 66025-11983-01Numerical control of machines, format; general requirements[376]
  • DIN 66025-21988-09Industrial automation; numerical control of machines; format, preparatory and miscellaneous functions作废[377]

其他（ASTM、SAE、GB/T 等）

  • EIA RS-274-D公开资料中未能确认
  • GB/T 8870.1GB/T 8870.1-2012自动化系统与集成 机床数值控制 程序格式和地址字定义 第1部分：点位、直线运动和轮廓控制系统的数据格式现行有效[378][379]

📚出处

JIS 的编号、版本和状态，以日本工业标准调查会（JISC）与日本规格协会（JSA）的公开页面两者一致的内容为准。JIS 与 ISO 的对应程度仅以 JSA 的“对应国际标准”栏为出处。DIN、ASME、ASTM、SAE、GB/T 均以发布方单一页面核实。

  1. 日本规格协会（JSA Webdesk）“JIS B 0205-1:2001”
  2. 日本工业标准调查会（JISC）“JIS 检索（B0205-1）”
  3. 日本规格协会（JSA Webdesk）“JIS B 0205-2:2001”
  4. 日本规格协会（JSA Webdesk）“JIS B 0205-3:2001”
  5. 日本规格协会（JSA Webdesk）“JIS B 0205-4:2001”
  6. 日本规格协会（JSA Webdesk）“JIS B 0209-1:2001”
  7. 日本工业标准调查会（JISC）“JIS 检索（B0209-1）”
  8. 日本规格协会（JSA Webdesk）“JIS B 0209-2:2001”
  9. 日本规格协会（JSA Webdesk）“JIS B 0209-3:2001”
  10. 日本规格协会（JSA Webdesk）“JIS B 0123:1999”
  11. 日本工业标准调查会（JISC）“JIS 检索（B0123）”
  12. ISO（iso.org）“ISO 68-1:2023 - ISO general purpose screw threads — Basic and design profiles — Part 1: Metric screw threads”
  13. DIN Media（dinmedia.de）“ISO 68-1:2023-10 ISO general purpose screw threads - Basic and design profiles - Part 1: Metric screw threads”
  14. ISO（iso.org）“ISO 68-1:1998 - ISO general purpose screw threads — Basic profile — Part 1: Metric screw threads”
  15. DIN Media（dinmedia.de）“ISO 68-1:1998-12 ISO general purpose screw threads - Basic profile - Part 1: Metric screw threads”
  16. ISO（iso.org）“ISO 261:1998 - ISO general purpose metric screw threads — General plan”
  17. DIN Media（dinmedia.de）“ISO 261:1998-12 ISO general purpose metric screw threads - General plan”
  18. ISO（iso.org）“ISO 262:2023 - ISO general purpose metric screw threads — Selected sizes for bolts, screws, studs and nuts”
  19. ISO（iso.org）“ISO 262:1998 - ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts”
  20. ISO（iso.org）“ISO 724:2023 - ISO general purpose metric screw threads — Basic dimensions”
  21. DIN Media（dinmedia.de）“ISO 724:2023-04 ISO general purpose metric screw threads - Basic dimensions”
  22. ISO（iso.org）“ISO 724:1993 - ISO general-purpose metric screw threads — Basic dimensions”
  23. ISO（iso.org）“ISO 965-1:2026 - ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data”
  24. ISO（iso.org）“ISO 965-1:2013 - ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data”
  25. DIN Media（dinmedia.de）“ISO 965-1:2013-09 ISO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data”
  26. ISO（iso.org）“ISO 965-2:2024 - ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for internal and external threads (tolerance classes 6H and 6g for M1,6 to M100 and 5H and 6h for M1 to M1,4)”
  27. DIN Media（dinmedia.de）“ISO 965-2:2024-11 ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for internal and external threads (tolerance classes 6H and 6g for M1,6 to M100 and 5H and 6h for M1 to M1,4)”
  28. ISO（iso.org）“ISO 965-3:2021 - ISO general purpose metric screw threads — Tolerances — Part 3: Limit deviations for screw threads”
  29. DIN Media（dinmedia.de）“ISO 965-3:2021-07 ISO general purpose metric screw threads - Tolerances - Part 3: Limit deviations for screw threads”
  30. DIN Media（dinmedia.de）“DIN 13-1:1999-11 ISO general purpose metric screw threads - Part 1: Nominal sizes for coarse pitch threads; nominal diameter from 1 mm to 68 mm”
  31. DIN Media（dinmedia.de）“DIN ISO 68-1:2024-09 ISO general purpose screw threads - Basic and design profiles - Part 1: Metric screw threads (ISO 68-1:2023)”
  32. DIN Media（dinmedia.de）“DIN ISO 262:2024-09 ISO general purpose metric screw threads - Selected sizes for bolts, screws, studs and nuts (ISO 262:2023)”
  33. DIN Media（dinmedia.de）“DIN ISO 724:2024-09 ISO general purpose metric screw threads - Basic dimensions (ISO 724:2023)”
  34. DIN Media（dinmedia.de）“DIN ISO 965-1:2026-09 ISO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data (ISO 965-1:2026)”
  35. DIN Media（dinmedia.de）“DIN ISO 965-1:2017-05 ISO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data (ISO 965-1:2013)”
  36. DIN Media（dinmedia.de）“DIN ISO 965-2:2025-04 ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for internal and external threads (tolerance classes 6H and 6g for M1,6 to M100 and 5H and 6h for M1 to M1,4) (ISO 965-2:2024)”
  37. DIN Media（dinmedia.de）“DIN ISO 965-3:2024-08 ISO general purpose metric screw threads - Tolerances - Part 3: Limit deviations for screw threads (ISO 965-3:2021)”
  38. ASME（asme.org）“B1.13M - Metric Screw Threads: M Profile”
  39. 全国标准信息公共服务平台（SAMR）“GB/T 192 搜索结果”
  40. 全国标准信息公共服务平台（SAMR）“GB/T 192-2025”
  41. 全国标准信息公共服务平台（SAMR）“GB/T 193 搜索结果”
  42. 全国标准信息公共服务平台（SAMR）“GB/T 193-2003”
  43. 全国标准信息公共服务平台（SAMR）“GB/T 196 搜索结果”
  44. 全国标准信息公共服务平台（SAMR）“GB/T 196-2025”
  45. 全国标准信息公共服务平台（SAMR）“GB/T 197 搜索结果”
  46. 全国标准信息公共服务平台（SAMR）“GB/T 197-2018”
  47. 日本规格协会（JSA Webdesk）“JIS B 0206:1973”
  48. 日本工业标准调查会（JISC）“JIS 检索（B0206）”
  49. 日本规格协会（JSA Webdesk）“JIS B 0208:1973”
  50. 日本工业标准调查会（JISC）“JIS 检索（B0208）”
  51. 日本规格协会（JSA Webdesk）“JIS B 0210:1973”
  52. 日本工业标准调查会（JISC）“JIS 检索（B0210）”
  53. 日本规格协会（JSA Webdesk）“JIS B 0212:1973”
  54. 日本工业标准调查会（JISC）“JIS 检索（B0212）”
  55. ISO（iso.org）“ISO 68-2:2023 - ISO general purpose screw threads — Basic and design profiles — Part 2: Inch screw threads”
  56. DIN Media（dinmedia.de）“ISO 68-2:2023-10 ISO general purpose screw threads - Basic and design profiles - Part 2: Inch screw threads”
  57. ISO（iso.org）“ISO 68-2:1998 - ISO general purpose screw threads — Basic profile — Part 2: Inch screw threads”
  58. ISO（iso.org）“ISO 263:1973 - ISO inch screw threads — General plan and selection for screws, bolts and nuts — Diameter range 0,06 to 6 in”
  59. ISO（iso.org）“ISO 5864:1993 - ISO inch screw threads — Allowances and tolerances”
  60. ASME（asme.org）“B1.1 - Unified Inch Screw Threads (UN, UNR, and UNJ Thread Forms)”
  61. 全国标准信息公共服务平台（SAMR）“GB/T 20670 搜索结果”
  62. 全国标准信息公共服务平台（SAMR）“GB/T 20670-2006”
  63. 全国标准信息公共服务平台（SAMR）“GB/T 20668 搜索结果”
  64. 全国标准信息公共服务平台（SAMR）“GB/T 20668-2006”
  65. 全国标准信息公共服务平台（SAMR）“GB/T 20666 搜索结果”
  66. 全国标准信息公共服务平台（SAMR）“GB/T 20666-2006”
  67. 日本规格协会（JSA Webdesk）“JIS B 0202:1999”
  68. 日本工业标准调查会（JISC）“JIS 检索（B0202）”
  69. 日本规格协会（JSA Webdesk）“JIS B 0203:1999”
  70. 日本工业标准调查会（JISC）“JIS 检索（B0203）”
  71. ISO（iso.org）“ISO 228-1:2000 - Pipe threads where pressure-tight joints are not made on the threads — Part 1: Dimensions, tolerances and designation”
  72. DIN Media（dinmedia.de）“ISO 228-1:2000-09 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation”
  73. ISO（iso.org）“ISO 7-1:1994 - Pipe threads where pressure-tight joints are made on the threads — Part 1: Dimensions, tolerances and designation”
  74. DIN Media（dinmedia.de）“ISO 7-1:1994-05 Pipe threads where pressure-tight joints are made on the threads - Part 1: Dimensions, tolerances and designation”
  75. ISO（iso.org）“ISO 7-2:2000 - Pipe threads where pressure-tight joints are made on the threads — Part 2: Verification by means of limit gauges”
  76. DIN Media（dinmedia.de）“DIN EN ISO 228-1:2003-05 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000); German version EN ISO 228-1:2003”
  77. DIN Media（dinmedia.de）“DIN ISO 228-1:2001-04 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)”
  78. DIN Media（dinmedia.de）“DIN EN 10226-1:2004-10 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation; German version EN 10226-1:2004”
  79. ASME（asme.org）“B1.20.1 - Pipe Threads, General Purpose, Inch”
  80. 全国标准信息公共服务平台（SAMR）“GB/T 7307 搜索结果”
  81. 全国标准信息公共服务平台（SAMR）“GB/T 7307-2001”
  82. 全国标准信息公共服务平台（SAMR）“GB/T 7306.1 搜索结果”
  83. 全国标准信息公共服务平台（SAMR）“GB/T 7306.1-2000”
  84. 全国标准信息公共服务平台（SAMR）“GB/T 7306.2 搜索结果”
  85. 全国标准信息公共服务平台（SAMR）“GB/T 7306.2-2000”
  86. 全国标准信息公共服务平台（SAMR）“GB/T 12716 搜索结果”
  87. 全国标准信息公共服务平台（SAMR）“GB/T 12716-2011”
  88. 日本规格协会（JSA Webdesk）“JIS B 0401-1:2016”
  89. 日本工业标准调查会（JISC）“JIS 检索（B0401-1）”
  90. 日本规格协会（JSA Webdesk）“JIS B 0401-2:2016”
  91. ISO（iso.org）“ISO 286-1:2010 - Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — Part 1: Basis of tolerances, deviations and fits”
  92. DIN Media（dinmedia.de）“ISO 286-1:2010-04 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits”
  93. ISO（iso.org）“ISO 286-2:2010 - Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts”
  94. DIN Media（dinmedia.de）“ISO 286-2:2010-06 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts”
  95. DIN Media（dinmedia.de）“DIN EN ISO 286-1:2019-09 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010 + Cor 1:2013); German version EN ISO 286-1:2010 + AC:2013”
  96. DIN Media（dinmedia.de）“DIN EN ISO 286-2:2019-09 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010 + Cor 1:2013); German version EN ISO 286-2:2010 + AC:2013”
  97. ASME（asme.org）“B4.1 - Preferred Limits and Fits for Cylindrical Parts”
  98. ASME（cstools.asme.org）“Y14 DOCUMENT STATUS（Updated 20 Aug 2026）”
  99. ASME（asme.org）“B4.2 - Preferred Metric Limits and Fits”
  100. 全国标准信息公共服务平台（SAMR）“GB/T 1800.1 搜索结果”
  101. 全国标准信息公共服务平台（SAMR）“GB/T 1800.1-2020”
  102. 全国标准信息公共服务平台（SAMR）“GB/T 1800.2 搜索结果”
  103. 全国标准信息公共服务平台（SAMR）“GB/T 1800.2-2020”
  104. 日本规格协会（JSA Webdesk）“JIS B 0405:1991”
  105. 日本工业标准调查会（JISC）“JIS 检索（B0405）”
  106. 日本规格协会（JSA Webdesk）“JIS B 0419:1991”
  107. 日本工业标准调查会（JISC）“JIS 检索（B0419）”
  108. ISO（iso.org）“ISO 2768-1:1989 - General tolerances — Part 1: Tolerances for linear and angular dimensions without individual tolerance indications”
  109. DIN Media（dinmedia.de）“ISO 2768-1:1989-11 General tolerances; part 1: tolerances for linear and angular dimensions without individual tolerance indications”
  110. ISO（iso.org）“ISO 2768 - Geometrical product specifications (GPS) — Dimensional tolerancing — Tolerance limits for general specification of linear and angular sizes”
  111. ISO（iso.org）“ISO 2768-2:1989 - General tolerances — Part 2: Geometrical tolerances for features without individual tolerance indications”
  112. ISO（iso.org）“ISO 22081:2021 - Geometrical product specifications (GPS) — Geometrical tolerancing — General geometrical specifications and general size specifications”
  113. DIN Media（dinmedia.de）“ISO 22081:2021-02 Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications”
  114. DIN Media（dinmedia.de）“DIN ISO 2768-1:1991-06 General tolerances; tolerances for linear and angular dimensions without individual tolerance indications; identical with ISO 2768-1:1989”
  115. DIN Media（dinmedia.de）“DIN EN ISO 2768:2025-09 - Draft Geometrical product specifications (GPS) - Dimensional tolerancing - Tolerance limits for general specification of linear and angular sizes (ISO/DIS 2768:2025); German and English version prEN ISO 2768:2025”
  116. DIN Media（dinmedia.de）“DIN EN ISO 22081:2022-10 Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications (ISO 22081:2021); German version EN ISO 22081:2021”
  117. 全国标准信息公共服务平台（SAMR）“GB/T 1804 搜索结果”
  118. 全国标准信息公共服务平台（SAMR）“GB/T 1804-2000”
  119. 全国标准信息公共服务平台（SAMR）“GB/T 1184 搜索结果”
  120. 全国标准信息公共服务平台（SAMR）“GB/T 1184-1996”
  121. 日本规格协会（JSA Webdesk）“JIS B 0021:1998”
  122. 日本工业标准调查会（JISC）“JIS 检索（B0021）”
  123. 日本规格协会（JSA Webdesk）“JIS B 0022:1984”
  124. 日本工业标准调查会（JISC）“JIS 检索（B0022）”
  125. 日本规格协会（JSA Webdesk）“JIS B 0024:2019”
  126. 日本工业标准调查会（JISC）“JIS 检索（B0024）”
  127. ISO（iso.org）“ISO 1101:2017 - Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out”
  128. DIN Media（dinmedia.de）“ISO 1101:2017-02 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out”
  129. ISO（iso.org）“ISO 5459:2024 - Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems”
  130. DIN Media（dinmedia.de）“ISO 5459:2024-10 Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems”
  131. ISO（iso.org）“ISO 5459:1981 - Technical drawings — Geometrical tolerancing — Datums and datum-systems for geometrical tolerances”
  132. ISO（iso.org）“ISO 8015:2011 - Geometrical product specifications (GPS) — Fundamentals — Concepts, principles and rules”
  133. DIN Media（dinmedia.de）“ISO 8015:2011-06 Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules”
  134. ISO（iso.org）“ISO 8015:1985 - Technical drawings — Fundamental tolerancing principle”
  135. DIN Media（dinmedia.de）“DIN EN ISO 1101:2017-09 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017); German version EN ISO 1101:2017”
  136. DIN Media（dinmedia.de）“DIN EN ISO 5459:2025-12 Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2024); German version EN ISO 5459:2024”
  137. DIN Media（dinmedia.de）“DIN EN ISO 8015:2011-09 Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011); German version EN ISO 8015:2011”
  138. ASME（asme.org）“Y14.5 - Dimensioning and Tolerancing”
  139. 全国标准信息公共服务平台（SAMR）“GB/T 1182 搜索结果”
  140. 全国标准信息公共服务平台（SAMR）“GB/T 1182-2018”
  141. 日本规格协会（JSA Webdesk）“JIS B 0001:2019”
  142. 日本工业标准调查会（JISC）“JIS 检索（B0001）”
  143. 日本规格协会（JSA Webdesk）“JIS Z 8310:2010”
  144. 日本工业标准调查会（JISC）“JIS 检索（Z8310）”
  145. 日本规格协会（JSA Webdesk）“JIS Z 8315-2:1999”
  146. 日本工业标准调查会（JISC）“JIS 检索（Z8315-2）”
  147. 日本规格协会（JSA Webdesk）“JIS Z 8316:1999”
  148. 日本工业标准调查会（JISC）“JIS 检索（Z8316）”
  149. 日本规格协会（JSA Webdesk）“JIS Z 8317-1:2008”
  150. 日本工业标准调查会（JISC）“JIS 检索（Z8317-1）”
  151. ISO（iso.org）“ISO 128-1:2020 - Technical product documentation (TPD) — General principles of representation — Part 1: Introduction and fundamental requirements”
  152. DIN Media（dinmedia.de）“ISO 128-1:2020-05 Technical product documentation (TPD) - General principles of representation - Part 1: Introduction and fundamental requirements”
  153. ISO（iso.org）“ISO 128-2:2022 - Technical product documentation (TPD) — General principles of representation — Part 2: Basic conventions for lines”
  154. ISO（iso.org）“ISO 128-3:2022 - Technical product documentation (TPD) — General principles of representation — Part 3: Views, sections and cuts”
  155. ISO（iso.org）“ISO 129-1:2018 - Technical product documentation (TPD) — Presentation of dimensions and tolerances — Part 1: General principles”
  156. DIN Media（dinmedia.de）“ISO 129-1:2018-02 Technical product documentation (TPD) - Presentation of dimensions and tolerances - Part 1: General principles”
  157. ISO（iso.org）“ISO 5456-2:1996 - Technical drawings — Projection methods — Part 2: Orthographic representations”
  158. DIN Media（dinmedia.de）“ISO 5456-2:1996-06 Technical drawings - Projection methods - Part 2: Orthographic representations”
  159. DIN Media（dinmedia.de）“DIN EN ISO 128-1:2022-02 Technical product documentation (TPD) - General principles of representation - Part 1: Introduction and fundamental requirements (ISO 128-1:2020); German version EN ISO 128-1:2020”
  160. DIN Media（dinmedia.de）“DIN EN ISO 129-1:2022-02 Technical product documentation (TPD) - Presentation of dimensions and tolerances - Part 1: General principles (ISO 129-1:2018 + Amd 1:2020); German version EN ISO 129-1:2019 + A1:2021”
  161. DIN Media（dinmedia.de）“DIN ISO 5456-2:1998-04 Technical drawings - Projection methods - Part 2: Orthographic representations (ISO 5456-2:1996)”
  162. ASME（asme.org）“Y14.3 - Orthographic and Pictorial Views”
  163. ASME（asme.org）“Y14.100 - Engineering Drawing Practices”
  164. 全国标准信息公共服务平台（SAMR）“GB/T 4458.1 检索结果”
  165. 全国标准信息公共服务平台（SAMR）“GB/T 4458.1-2002”
  166. 全国标准信息公共服务平台（SAMR）“GB/T 14692 检索结果”
  167. 全国标准信息公共服务平台（SAMR）“GB/T 14692-2008”
  168. 日本规格协会（JSA Webdesk）“JIS B 0601:2013”
  169. 日本工业标准调查会（JISC）“JIS 检索（B0601）”
  170. 日本规格协会（JSA Webdesk）“JIS B 0031:2003”
  171. 日本工业标准调查会（JISC）“JIS 检索（B0031）”
  172. 日本规格协会（JSA Webdesk）“JIS B 0031:2003/AMENDMENT 1:2022”
  173. 日本规格协会（JSA Webdesk）“JIS B 0633:2001”
  174. 日本工业标准调查会（JISC）“JIS 检索（B0633）”
  175. 日本规格协会（JSA Webdesk）“JIS B 0651:2001”
  176. 日本工业标准调查会（JISC）“JIS 检索（B0651）”
  177. 日本规格协会（JSA Webdesk）“JIS B 0651:2001/AMENDMENT 1:2022”
  178. 日本规格协会（JSA Webdesk）“JIS B 0681-2:2018”
  179. 日本工业标准调查会（JISC）“JIS 检索（B0681-2）”
  180. ISO（iso.org）“ISO 21920-1:2021 - Geometrical product specifications (GPS) — Surface texture: Profile — Part 1: Indication of surface texture”
  181. DIN Media（dinmedia.de）“ISO 21920-1:2021-12 Geometrical product specifications (GPS) - Surface texture: Profile - Part 1: Indication of surface texture”
  182. ISO（iso.org）“ISO 21920-2:2021 - Geometrical product specifications (GPS) — Surface texture: Profile — Part 2: Terms, definitions and surface texture parameters”
  183. DIN Media（dinmedia.de）“ISO 21920-2:2021-12 Geometrical product specifications (GPS) - Surface texture: Profile - Part 2: Terms, definitions and surface texture parameters”
  184. ISO（iso.org）“ISO 21920-3:2021 - Geometrical product specifications (GPS) — Surface texture: Profile — Part 3: Specification operators”
  185. DIN Media（dinmedia.de）“ISO 21920-3:2021-12 Geometrical product specifications (GPS) - Surface texture: Profile - Part 3: Specification operators”
  186. ISO（iso.org）“ISO 25178-2:2021 - Geometrical product specifications (GPS) — Surface texture: Areal — Part 2: Terms, definitions and surface texture parameters”
  187. DIN Media（dinmedia.de）“ISO 25178-2:2021-12 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters”
  188. ISO（iso.org）“ISO 3274:1996 - Geometrical Product Specifications (GPS) — Surface texture: Profile method — Nominal characteristics of contact (stylus) instruments”
  189. ISO（iso.org）“ISO 4287:1997 - Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters”
  190. ISO（iso.org）“ISO 1302:2002 - Geometrical Product Specifications (GPS) — Indication of surface texture in technical product documentation”
  191. DIN Media（dinmedia.de）“ISO 1302:2002-02 Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation”
  192. DIN Media（dinmedia.de）“DIN EN ISO 21920-1:2022-12 Geometrical product specifications (GPS) - Surface texture: Profile - Part 1: Indication of surface texture (ISO 21920-1:2021); German version EN ISO 21920-1:2022”
  193. DIN Media（dinmedia.de）“DIN EN ISO 21920-2:2022-12 Geometrical product specifications (GPS) - Surface texture: Profile - Part 2: Terms, definitions and surface texture parameters (ISO 21920-2:2021, Corrected version 2022-06); German version EN ISO 21920-2:2022”
  194. DIN Media（dinmedia.de）“DIN EN ISO 21920-3:2022-12 Geometrical product specifications (GPS) - Surface texture: Profile - Part 3: Specification operators (ISO 21920-3:2021); German version EN ISO 21920-3:2022”
  195. ASME（asme.org）“B46.1 - Surface Texture (Surface Roughness, Waviness, and Lay)”
  196. ASME（asme.org）“Y14.36 - Surface Texture Symbols”
  197. 全国标准信息公共服务平台（SAMR）“GB/T 3505 检索结果”
  198. 全国标准信息公共服务平台（SAMR）“GB/T 3505-2009”
  199. 全国标准信息公共服务平台（SAMR）“GB/T 131 检索结果”
  200. 全国标准信息公共服务平台（SAMR）“GB/T 131-2006”
  201. 日本规格协会（JSA Webdesk）“JIS Z 2243-1:2018”
  202. 日本工业标准调查会（JISC）“JIS 检索（Z2243-1）”
  203. 日本规格协会（JSA Webdesk）“JIS Z 2244-1:2024”
  204. 日本工业标准调查会（JISC）“JIS 检索（Z2244-1）”
  205. 日本规格协会（JSA Webdesk）“JIS Z 2245:2021”
  206. 日本工业标准调查会（JISC）“JIS 检索（Z2245）”
  207. 日本规格协会（JSA Webdesk）“JIS Z 2246:2022”
  208. 日本工业标准调查会（JISC）“JIS 检索（Z2246）”
  209. 日本规格协会（JSA Webdesk）“JIS Z 2251-1:2024”
  210. 日本工业标准调查会（JISC）“JIS 检索（Z2251-1）”
  211. ISO（iso.org）“ISO 6506-1:2014 - Metallic materials — Brinell hardness test — Part 1: Test method”
  212. DIN Media（dinmedia.de）“ISO 6506-1:2014-10 Metallic materials - Brinell hardness test - Part 1: Test method”
  213. ISO（iso.org）“ISO 6507-1:2023 - Metallic materials — Vickers hardness test — Part 1: Test method”
  214. DIN Media（dinmedia.de）“ISO 6507-1:2023-10 Metallic materials - Vickers hardness test - Part 1: Test method”
  215. ISO（iso.org）“ISO 6508-1:2023 - Metallic materials — Rockwell hardness test — Part 1: Test method”
  216. DIN Media（dinmedia.de）“ISO 6508-1:2023-12 Metallic materials - Rockwell hardness test - Part 1: Test method”
  217. ISO（iso.org）“ISO 4545-1:2023 - Metallic materials — Knoop hardness test — Part 1: Test method”
  218. ISO（iso.org）“ISO 18265:2013 - Metallic materials — Conversion of hardness values”
  219. DIN Media（dinmedia.de）“ISO 18265:2013-10 Metallic materials - Conversion of hardness values”
  220. DIN Media（dinmedia.de）“DIN EN ISO 6506-1:2015-02 Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014); German version EN ISO 6506-1:2014”
  221. DIN Media（dinmedia.de）“DIN EN ISO 6507-1:2024-01 Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:2023); German version EN ISO 6507-1:2023”
  222. DIN Media（dinmedia.de）“DIN EN ISO 6508-1:2024-04 Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2023); German version EN ISO 6508-1:2023”
  223. DIN Media（dinmedia.de）“DIN EN ISO 4545-1:2024-01 Metallic materials - Knoop hardness test - Part 1: Test method (ISO 4545-1:2023); German version EN ISO 4545-1:2023”
  224. DIN Media（dinmedia.de）“DIN EN ISO 18265:2014-02 Metallic materials - Conversion of hardness values (ISO 18265:2013); German version EN ISO 18265:2013”
  225. ASTM International（store.astm.org）“ASTM E10-23 Standard Test Method for Brinell Hardness of Metallic Materials”
  226. ASTM International（store.astm.org）“ASTM E18-25 Standard Test Methods for Rockwell Hardness of Metallic Materials”
  227. ASTM International（store.astm.org）“ASTM E92-26 Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials”
  228. ASTM International（store.astm.org）“ASTM E384-22 Standard Test Method for Microindentation Hardness of Materials”
  229. ASTM International（store.astm.org）“ASTM E140-12B(2019)e1 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness”
  230. SAE International（saemobilus.sae.org）“J417_201801: Hardness Tests and Hardness Number Conversions”
  231. 全国标准信息公共服务平台（SAMR）“GB/T 231.1 检索结果”
  232. 全国标准信息公共服务平台（SAMR）“GB/T 231.1-2018”
  233. 全国标准信息公共服务平台（SAMR）“GB/T 4340.1 检索结果”
  234. 全国标准信息公共服务平台（SAMR）“GB/T 4340.1-2024”
  235. 全国标准信息公共服务平台（SAMR）“GB/T 230.1 检索结果”
  236. 全国标准信息公共服务平台（SAMR）“GB/T 230.1-2018”
  237. 全国标准信息公共服务平台（SAMR）“GB/T 33362 检索结果”
  238. 全国标准信息公共服务平台（SAMR）“GB/T 33362-2016”
  239. 日本规格协会（JSA Webdesk）“JIS G 4051:2026”
  240. 日本工业标准调查会（JISC）“JIS 检索（G4051）”
  241. 日本规格协会（JSA Webdesk）“JIS G 4053:2026”
  242. 日本工业标准调查会（JISC）“JIS 检索（G4053）”
  243. 日本规格协会（JSA Webdesk）“JIS G 4303:2021”
  244. 日本工业标准调查会（JISC）“JIS 检索（G4303）”
  245. 日本规格协会（JSA Webdesk）“JIS G 4304:2021”
  246. 日本工业标准调查会（JISC）“JIS 检索（G4304）”
  247. 日本规格协会（JSA Webdesk）“JIS G 4305:2021”
  248. 日本工业标准调查会（JISC）“JIS 检索（G4305）”
  249. 日本规格协会（JSA Webdesk）“JIS G 4401:2025”
  250. 日本工业标准调查会（JISC）“JIS 检索（G4401）”
  251. 日本规格协会（JSA Webdesk）“JIS G 4404:2025”
  252. 日本工业标准调查会（JISC）“JIS 检索（G4404）”
  253. 日本规格协会（JSA Webdesk）“JIS G 3101:2024”
  254. 日本工业标准调查会（JISC）“JIS 检索（G3101）”
  255. ISO（iso.org）“ISO 683-1:2016 - Heat-treatable steels, alloy steels and free-cutting steels — Part 1: Non-alloy steels for quenching and tempering·”
  256. DIN Media（dinmedia.de）“ISO 683-1:2016-07 Heat-treatable steels, alloy steels and free-cutting steels - Part 1: Non-alloy steels for quenching and tempering”
  257. ISO（iso.org）“ISO 683-2:2016 - Heat-treatable steels, alloy steels and free-cutting steels — Part 2: Alloy steels for quenching and tempering”
  258. ISO（iso.org）“ISO 4957:2018 - Tool steels”
  259. DIN Media（dinmedia.de）“ISO 4957:2018-06 Tool steels”
  260. ISO（iso.org）“ISO 15510:2014 - Stainless steels — Chemical composition”
  261. DIN Media（dinmedia.de）“DIN EN 10027-1:2017-01 Designation systems for steels - Part 1: Steel names; German version EN 10027-1:2016”
  262. DIN Media（dinmedia.de）“DIN EN 10027-2:2015-07 Designation systems for steels - Part 2: Numerical system”
  263. DIN Media（dinmedia.de）“DIN EN ISO 683-1:2018-09 Heat-treatable steels, alloy steels and free-cutting steels - Part 1: Non-alloy steels for quenching and tempering (ISO 683-1:2016); German version EN ISO 683-1:2018”
  264. DIN Media（dinmedia.de）“DIN EN 10088-3:2024-04 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resistant steels for general purposes; German version EN 10088-3:2023”
  265. DIN Media（dinmedia.de）“DIN EN ISO 4957:2018-11 Tool steels (ISO 4957:2018); German version EN ISO 4957:2018”
  266. SAE International（saemobilus.sae.org）“J403_202402: Chemical Compositions of SAE Carbon Steels”
  267. SAE International（saemobilus.sae.org）“J404_200901: Chemical Compositions of SAE Alloy Steels”
  268. ASTM International（store.astm.org）“ASTM A276/A276M-25 Standard Specification for Stainless Steel Bars and Shapes”
  269. 全国标准信息公共服务平台（SAMR）“GB/T 699 检索结果”
  270. 全国标准信息公共服务平台（SAMR）“GB/T 699-2015”
  271. 全国标准信息公共服务平台（SAMR）“GB/T 3077 检索结果”
  272. 全国标准信息公共服务平台（SAMR）“GB/T 3077-2015”
  273. 全国标准信息公共服务平台（SAMR）“GB/T 1220 检索结果”
  274. 全国标准信息公共服务平台（SAMR）“GB/T 1220-2007”
  275. 全国标准信息公共服务平台（SAMR）“GB/T 20878 检索结果”
  276. 全国标准信息公共服务平台（SAMR）“GB/T 20878-2024”
  277. 全国标准信息公共服务平台（SAMR）“GB/T 1299 检索结果”
  278. 全国标准信息公共服务平台（SAMR）“GB/T 1299-2025”
  279. 全国标准信息公共服务平台（SAMR）“GB/T 221 检索结果”
  280. 全国标准信息公共服务平台（SAMR）“GB/T 221-2008”
  281. 全国标准信息公共服务平台（SAMR）“GB/T 17616 检索结果”
  282. 全国标准信息公共服务平台（SAMR）“GB/T 17616-2025”
  283. 日本规格协会（JSA Webdesk）“JIS B 4053:2013”
  284. 日本工业标准调查会（JISC）“JIS 检索（B4053）”
  285. 日本规格协会（JSA Webdesk）“JIS B 4120:2025”
  286. 日本工业标准调查会（JISC）“JIS 检索（B4120）”
  287. 日本规格协会（JSA Webdesk）“JIS B 4125:2016”
  288. 日本工业标准调查会（JISC）“JIS 检索（B4125）”
  289. 日本规格协会（JSA Webdesk）“JIS B 4121:2013”
  290. 日本工业标准调查会（JISC）“JIS 检索（B4121）”
  291. ISO（iso.org）“ISO 513:2012 - Classification and application of hard cutting materials for metal removal with defined cutting edges — Designation of the main groups and groups of application”
  292. DIN Media（dinmedia.de）“ISO 513:2012-11 Classification and application of hard cutting materials for metal removal with defined cutting edges - Designation of the main groups and groups of application”
  293. ISO（iso.org）“ISO 1832:2017 - Indexable inserts for cutting tools — Designation”
  294. DIN Media（dinmedia.de）“ISO 1832:2017-02 Indexable inserts for cutting tools - Designation”
  295. ISO（iso.org）“ISO 5608:2012 - Turning and copying tool holders and cartridges for indexable inserts — Designation”
  296. DIN Media（dinmedia.de）“ISO 5608:2012-08 Turning and copying tool holders and cartridges for indexable inserts - Designation”
  297. DIN Media（dinmedia.de）“DIN ISO 513:2014-05 Classification and application of hard cutting materials for metal removal with defined cutting edges - Designation of the main groups and groups of application (ISO 513:2012)”
  298. DIN Media（dinmedia.de）“DIN ISO 1832:2017-06 Indexable inserts for cutting tools - Designation (ISO 1832:2017)”
  299. 伊利诺伊大学 Grainger Engineering Library（规格收藏）“ANSI B212.4 CUTTING TOOLS - INDEXABLE INSERTS - IDENTIFICATION SYSTEM”
  300. 全国标准信息公共服务平台（SAMR）“GB/T 2075 检索结果”
  301. 全国标准信息公共服务平台（SAMR）“GB/T 2075-2025”
  302. 全国标准信息公共服务平台（SAMR）“GB/T 2076 检索结果”
  303. 全国标准信息公共服务平台（SAMR）“GB/T 2076-2021”
  304. 全国标准信息公共服务平台（SAMR）“GB/T 5343.1 检索结果”
  305. 全国标准信息公共服务平台（SAMR）“GB/T 5343.1-2007”
  306. 日本规格协会（JSA Webdesk）“JIS B 6339-1:2011”
  307. 日本工业标准调查会（JISC）“JIS 检索（B6339-1）”
  308. 日本规格协会（JSA Webdesk）“JIS B 6339-2:2011”
  309. 日本规格协会（JSA Webdesk）“JIS B 6339-3:2011”
  310. 日本规格协会（JSA Webdesk）“JIS B 6064-1:2013”
  311. 日本工业标准调查会（JISC）“JIS 检索（B6064-1）”
  312. 日本规格协会（JSA Webdesk）“JIS B 6064-2:2013”
  313. 日本规格协会（JSA Webdesk）“JIS B 4003:1999”
  314. 日本工业标准调查会（JISC）“JIS 检索（B4003）”
  315. ISO（iso.org）“ISO 7388-1:2007 - Tool shanks with 7/24 taper for automatic tool changers — Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF”
  316. DIN Media（dinmedia.de）“ISO 7388-1:2007-08 Tool shanks with 7/24 taper for automatic tool changers - Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF”
  317. ISO（iso.org）“ISO 7388-2:2007 - Tool shanks with 7/24 taper for automatic tool changers — Part 2: Dimensions and designation of shanks of forms J, JD and JF”
  318. DIN Media（dinmedia.de）“ISO 7388-2:2007-08 Tool shanks with 7/24 taper for automatic tool changers - Part 2: Dimensions and designation of shanks of forms J, JD and JF”
  319. DIN Media（dinmedia.de）“ISO 7388-3:2016-02 Tool shanks with 7/24 taper for automatic tool changers - Part 3: Retention knobs of forms AD, AF, UD, UF, JD and JF”
  320. ISO（iso.org）“ISO 12164-1:2023 - Hollow taper interface with flange contact surface — Part 1: Shanks of types A, AB, C, CB and EB”
  321. DIN Media（dinmedia.de）“ISO 12164-1:2023-10 Hollow taper interface with flange contact surface - Part 1: Shanks of types A, AB, C, CB and EB”
  322. ISO（iso.org）“ISO 296:1991 - Machine tools — Self-holding tapers for tool shanks”
  323. DIN Media（dinmedia.de）“ISO 296:1991-04 Machine tools; self-holding tapers for tool shanks”
  324. ISO（iso.org）“ISO 15488:2003 - Collets with 8 degree setting angle for tool shanks — Collets, nuts and fitting dimensions”
  325. DIN Media（dinmedia.de）“ISO 15488:2003-11 Collets with 8° setting angle for tool shanks - Collets, nuts and fitting dimensions”
  326. DIN Media（dinmedia.de）“DIN 69871-1:1995-10 Tool shanks with 7/24 taper for automatic tool exchange - Part 1: Type A, type AD, type B and with data media”
  327. DIN Media（dinmedia.de）“DIN ISO 7388-1:2014-07 Tool shanks with 7/24 taper for automatic tool changers - Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF (ISO 7388-1:2007)”
  328. DIN Media（dinmedia.de）“DIN ISO 7388-2:2021-12 Tool shanks with 7/24 taper for automatic tool changers - Part 2: Dimensions and designation of shanks of forms J, JD and JF (ISO 7388-2:2007)”
  329. DIN Media（dinmedia.de）“DIN 69893-1:2011-04 Hollow taper shanks with flange contact surface - Part 1: Hollow taper shanks type A and type C; Dimensions and design”
  330. DIN Media（dinmedia.de）“DIN 228-1:1987-05 Morse tapers and metric tapers; taper shanks”
  331. DIN Media（dinmedia.de）“DIN 6499:2002-04 Collets with 8° setting angle for tool shanks - Collets, nuts and fitting dimensions”
  332. DIN Media（dinmedia.de）“DIN ISO 15488:2006-01 Collets with 8° setting angle for tool shanks - Collets, nuts and fitting dimensions (ISO 15488:2003)”
  333. ASME（asme.org）“B5.50 - 7/24 Taper Tool to Spindle Connection for Automatic Tool Change”
  334. ASME（asme.org）“B5.62M - Hollow Taper Tooling with Flange-Face Contact”
  335. ASME（asme.org）“B5.10 - Machine Tapers-Self Holding and Steep Taper Series”
  336. 全国标准信息公共服务平台（SAMR）“GB/T 10944.1 检索结果”
  337. 全国标准信息公共服务平台（SAMR）“GB/T 10944.1-2013”
  338. 全国标准信息公共服务平台（SAMR）“GB/T 1443 检索结果”
  339. 全国标准信息公共服务平台（SAMR）“GB/T 1443-2016”
  340. 日本规格协会（JSA Webdesk）“JIS B 1701-1:2012”
  341. 日本工业标准调查会（JISC）“JIS 检索（B1701-1）”
  342. 日本规格协会（JSA Webdesk）“JIS B 1701-2:2017”
  343. 日本规格协会（JSA Webdesk）“JIS B 1702-1:2016”
  344. 日本工业标准调查会（JISC）“JIS 检索（B1702-1）”
  345. 日本规格协会（JSA Webdesk）“JIS B 1702-2:2022”
  346. ISO（iso.org）“ISO 53:1998 - Cylindrical gears for general and heavy engineering — Standard basic rack tooth profile”
  347. DIN Media（dinmedia.de）“ISO 53:1998-08 Cylindrical gears for general and heavy engineering - Standard basic rack tooth profile”
  348. ISO“ISO 54:1996 Cylindrical gears for general engineering and for heavy engineering — Modules（规格介绍页面）”
  349. DIN Media（dinmedia.de）“ISO 54:1996-12 Cylindrical gears for general engineering and for heavy engineering - Modules”
  350. ISO“ISO 1328-1:2013 Cylindrical gears — ISO system of flank tolerance classification — Part 1（规格介绍页面：概要、状态）”
  351. DIN Media（dinmedia.de）“ISO 1328-1:2013-09 Cylindrical gears - ISO system of flank tolerance classification - Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth”
  352. DIN Media（dinmedia.de）“ISO 1328-2:2020-02 Cylindrical gears - ISO system of flank tolerance classification - Part 2: Definitions and allowable values of double flank radial composite deviations”
  353. DIN Media（dinmedia.de）“DIN 867:1986-02 Basic rack tooth profiles for involute teeth of cylindrical gears for general engineering and heavy engineering”
  354. DIN Media（dinmedia.de）“DIN 780-1:1977-05 Series of Modules for Gears; Modules for Spur Gears”
  355. DIN Media（dinmedia.de）“DIN 3961:1978-08 Tolerances for Cylindrical Gear Teeth; Bases”
  356. DIN Media（dinmedia.de）“DIN 3962-1:1978-08 Tolerances for Cylindrical Gear Teeth; Tolerances for Deviations of Individual Parameters”
  357. DIN Media（dinmedia.de）“DIN ISO 1328-1:2018-03 Cylindrical gears - ISO system of flank tolerance classification - Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth (ISO 1328-1:2013)”
  358. DIN Media（dinmedia.de）“DIN ISO 1328-2:2021-09 Cylindrical gears - ISO system of flank tolerance classification - Part 2: Definitions and allowable values of double flank radial composite deviations (ISO 1328-2:2020)”
  359. AGMA（members.agma.org）“ANSI/AGMA ISO 1328-1-B14 商品页面”
  360. 全国标准信息公共服务平台（SAMR）“GB/T 1356 检索结果”
  361. 全国标准信息公共服务平台（SAMR）“GB/T 1356-2001”
  362. 全国标准信息公共服务平台（SAMR）“GB/T 1357 检索结果”
  363. 全国标准信息公共服务平台（SAMR）“GB/T 1357-2008”
  364. 全国标准信息公共服务平台（SAMR）“GB/T 10095.1 检索结果”
  365. 全国标准信息公共服务平台（SAMR）“GB/T 10095.1-2022”
  366. 日本规格协会（JSA Webdesk）“JIS B 6315-1:2013”
  367. 日本工业标准调查会（JISC）“JIS 检索（B6315-1）”
  368. 日本规格协会（JSA Webdesk）“JIS B 6310:2003”
  369. 日本工业标准调查会（JISC）“JIS 检索（B6310）”
  370. ISO（iso.org）“ISO 6983-1:2009 - Automation systems and integration — Numerical control of machines — Program format and definitions of address words — Part 1: Data format for positioning, line motion and contouring control systems”
  371. DIN Media（dinmedia.de）“ISO 6983-1:2009-12 Automation systems and integration - Numerical control of machines - Program format and definitions of address words - Part 1: Data format for positioning, line motion and contouring control systems”
  372. ISO（iso.org）“ISO 6983-1:1982 - Numerical control of machines — Program format and definition of address words — Part 1: Data format for positioning, line motion and contouring control systems”
  373. DIN Media（dinmedia.de）“ISO 6983-1:1982-09 Numerical control of machines; Program format and definition of address words; Part 1 : Data format for positioning, line motion and contouring control systems”
  374. ISO（iso.org）“ISO 841:2001 - Industrial automation systems and integration — Numerical control of machines — Coordinate system and motion nomenclature”
  375. DIN Media（dinmedia.de）“ISO 841:2001-10 Industrial automation systems and integration - Numerical control of machines - Coordinate system and motion nomenclature”
  376. DIN Media（dinmedia.de）“DIN 66025-1:1983-01 Numerical control of machines, format; general requirements”
  377. DIN Media（dinmedia.de）“DIN 66025-2:1988-09 Industrial automation; numerical control of machines; format, preparatory and miscellaneous functions”
  378. 全国标准信息公共服务平台（SAMR）“GB/T 8870.1 检索结果”
  379. 全国标准信息公共服务平台（SAMR）“GB/T 8870.1-2012”